DIY Water Heater Repair Tips From Locals In Bluffdale, UT
The type of water heater in your Bluffdale home will determine how you go about repairs. For example, gas water heaters have different types of problems compared to electric water heaters.
Gas heaters use burners (gas-fired) right at the bottom of the tank in order to heat the water of the unit. Here are some DIY repair tips for gas water heaters:
Identify the Thermocouple or Flame Sensor
The thermocouple of the gas water heater helps keep the pilot light aflame by producing voltage between the two connective ends. If the pilot light isn’t working in your water heater, check your gas heater has a traditional thermocouple or a flame sensor. The latest heaters use flame sensors to light up the pilot light. The flame sensor is usually attached to the inside of the burner assembly – in front of the pilot light. Dirt and debris can prevent the flame sensor from lighting the pilot light.
Relight the Pilot Light
If the gas heater isn’t functioning as it should, the pilot light might be the problem. Follow the instructions in the user manual to relight the pilot light. If the pilot light goes off immediately after you light it, you may have to replace the flame sensor or thermocouple.
WE’re licensed, bonded, and insured Bluffdale water heater repair technicians
IN AN EMERGENCY? – CALL US NOW – AVAILABLE 24/7
If you have an electric water heater in your Bluffdale home, you should be aware of the following repair tips:
Assess the Breaker, Fuse, or Safety Switch
If your electric water heater isn’t heating water, you should turn off the power to the unit before attempting any DIY work. In some cases, a simple flip of the breaker or replacing the fuse can solve the problem. On the other hand, some units come with a safety switch that trips when it detects an issue in the unit. It is located near the thermostat and resetting it will solve the issue most of the time.
Test the Voltage
Testing the voltage using a multimeter will give you an idea of where the electrical shortage is coming from in case your water heater doesn’t turn on. The heater has one or two heating elements to heat the water. You can test the voltage of these elements using a multimeter to see if anything is wrong with them.
Signs You May Need A New Water Heater
Our experienced plumbers will inspect your water heater and recommend the best course of action to solve the problem. There are common signs you need to replace the water heater in your Bluffdale home including:
- The age of the unit
- Rusty water
- No hot water produced
- Strange noises that come from inside the unit
Why Choose Utah Water Heater Experts For Your Bluffdale Water Heater Repairs & Water Heater Replacements?
Water heater repairs and replacement are not the best DIY projects at times. You need an experienced professional to safely and efficiently solve the problem. When you have a malfunctioning or broken water heater in your Bluffdale home, you don’t need to look further than Utah Water Heater Experts. We have the right expertise, knowledge, skills, and equipment to solve all your water heater repair and replacement issues. Here is why you need to choose us:
- We are licensed, bonded, and fully insured
- Our company provides affordable water heater repairs & replacement solutions to all of Utah county and salt lake county
- We have the necessary tools to handle all types of water heater repairs
Call Utah Water Heater Experts today for all your water heater repair, replacement, installation, and maintenance needs in Bluffdale, UT!